Where to find the size
Stand beside the tyre and look at the sidewall. You will see a group of characters that looks something like 205/55R16 91V. That is the size, then the load index and the speed symbol. The same information is on the vehicle placard, usually on the driver's door or door frame, sometimes in the fuel flap. The placard is what the car was designed around. The sidewall is what is on the car now, which should match, or at least meet the load and speed ratings.
If the marking is worn or covered in dirt, wipe it and take a photo. That photo is the most useful thing you can send or bring in. You can also build the three main numbers with the size finder on this page, then call (07) 5527 0004 for a price.
Our longer tyre size guide has the load and speed tables and a labelled photo of a sidewall. This post is the short version most people need before they ring the workshop.
What 205/55R16 actually means
Take 205/55R16 91V as the example, because it is a very common passenger size on the Gold Coast.
- 205 is the width of the tyre in millimetres.
- 55 is the profile, or aspect ratio: the sidewall height is 55% of the width.
- R means radial construction, which is what almost every modern car tyre is.
- 16 is the wheel diameter in inches: the tyre is made for a 16 inch rim.
- 91 is the load index. For 91, that is 615 kg per tyre, in the standard tables.
- V is the speed symbol. V is 240 km/h in the standard tables. That is a capability mark, not an invitation to drive at that speed.
Some light-truck and commercial markings look slightly different, for example a size with a C at the end, or a hyphenated commercial size. If what you see does not look like the pattern above, read it to us over the phone. We fit passenger, 4x4, ute and van and light truck sizes at 37 Egerton Street, Southport.
Load and speed are not optional extras
The load index and speed symbol should meet or exceed what the vehicle manufacturer specified. Putting a lower-rated tyre on to save money is a bad idea, especially on a loaded ute, a tow vehicle or a people mover. If you are unsure, we will check the placard with you.
A wider tyre or a lower profile changes the way the car steers and can affect the speedometer if the overall diameter changes. Do not assume a size that 'looks close' will be right. If you want a different look, or you are building a wheel and tyre package, we will talk about what will actually fit before you buy.
The date of manufacture is a separate mark, usually a four-digit week and year code after the letters DOT. That is about age, not size. See how old is too old for tyres in Australia.
How to use the size when you call
Read the full marking, not just the three numbers. 205/55R16 91V and a similar-looking size with a different load or speed rating are not the same tyre. If you are replacing one tyre, we also need to know what is on the other three, so we can match type and remaining tread.
You can use the finder above to set the width, profile and rim, then call. We will quote new and, where we have them, used options. New and used tyres start from $35 fitted. We'll beat any quote or your tyres are FREE.
Most jobs are done while you wait. Bring the locking wheel nut key if your car has one. Visiting our Southport workshop lists the other small things that make the visit quicker.
If you are still not sure
Drive in and we will read the tyres with you. It takes a minute, and it avoids ordering the wrong size. We have been in the tyre trade for 30+ years, and we would rather check than have you leave with a number you do not trust.
If the car is not drivable, get the size off the placard or off a photo of the sidewall and call us. We can talk you through it.
Once you know the size, the next choice is often new versus used, or a particular type of tyre. Start at all tyres or tyre replacement, and come and see us at 37 Egerton Street.





